DJI RONIN-M

132,100 L

Specifications

  • Supports Cameras up to 8 Pounds
  • Precision of Control: ±0.02°
  • Transmitter for Remote Pan/Tilt Control
  • Toolless Balance Adjustment System
  • Assistant Software for iOS and Windows
  • Bluetooth Wireless Interface for Setup
  • Silent Mode for Quiet Operation
  • USB and D-Tap Power Outputs

 

SKU: E0119 Kategori:

General

Built-In Functions
  1. Three Operation Modes
    -Underslung Mode
    -Upright Mode
    -Briefcase Mode
  2. Built-in, independent IMU module
  3. DJI Specialized Gimbal Drive Motors with Encoders
  4. Bluetooth Module
  5. USB Connection
  6. 2.4GHz Receiver
  7. Temperature Sensor
  8. DJI Advanced 32-Bit DSP Processor
  9. D-Bus Receiver Supported

Peripheral

Camera Tray Dimensions Maximum depth at center of mass on camera base plate: 120mm
Maximum height measured from top of camera base plate: 195mm
Maximum width: 160mm
Accessory Power Connections 12V Regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1
GCU Input Power 4S Ronin-M Battery
Connections 2.4GHz Remote Controller, Bluetooth 4.0, USB 2.0
PC Assistant Software Requirements Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit);Mac OS X 10.9 or above
Mobile Assistant Software Requirements iOS 6.1 or above, Android 4.3 or above

Mechanical & Electrical Characteristics

Working Current Static current: 300mA (@16V)
Dynamic current: 600mA (@16V)
Locked motor current: Max 10A (@16V)
Run Time 3 hours
Operating Temperature 5° F ~ 120° F (-15° C ~ 50° C)
Weight 2.3kg (5.07lb) fully loaded with handlebar
Gimbal Dimensions 500mm(W) x 210mm(D)x 420mm(H)

Working Performance

Load Weight (Reference Value) 8lb (3.6kg)
Angular Vibration Range ± 0.02°
Maximum Controlled Rotation Speed Pan axis: 90°/s
Tilt axis: 100°/s
Roll axis: 30°/s
Mechanical Endpoint Range Pan axis: 360°
Tilt axis: +105° to -190°
Roll axis: ± 110°
Controlled Rotation Range Pan axis control: 360°
Tilt axis control: +105° /-190°
Roll axis control: ± 25°